DCI's Precision Comfort short HVE valve is constructed of anodized aluminum and is fully sterilizable. Features a slimmer, more ergonomic one-piece body, which will take away the need for an additional silicone tip and will be easily removable for fast and efficient cleaning.
HVE valve has a 1/2" quick disconnect.
Instructions for Precision Comfort Shorth HVE Valve:
- Firstly, pop lever assembly out and set aside for later.
- In the HVE tip, the o-ring will have the most wear. Lubricating this o-ring will reduce the frequency of replacements. Swipe silicone lubricant weekly with a q-tip across the o-ring.
- If replacing o-ring, then use a small instrument to lever it out of HVE tip.
- Lightly lubricate a new o-ring and then fold o-ring in half twice. Insert o-ring back into the tip and lever it up into the inside groove. Take a tool to make sure it is seated inside properly.
- If servicing the HVE valve lever, pop out of the valve.
- Lubricate and clean out debris from lever o-rings. If piece is dirty, make sure to clean out the grooves where the o-rings sit.
- Put replacement o-rings on by rolling them into the grooves.
- Finally, pop the valve lever back into the body of the HVE valve.
Repair Parts:
- HVE quick disconnect base (#03-291)
- HVE lever (#03-931)
- (12) O-rings (#18-OR-2253)
DCI's Precision Comfort short HVE valve is constructed of anodized aluminum and is fully sterilizable. Features a slimmer, more ergonomic one-piece body, which will take away the need for an additional silicone tip and will be easily removable for fast and efficient cleaning.
HVE valve has a 1/2" quick disconnect.
Instructions for Precision Comfort Shorth HVE Valve:
- Firstly, pop lever assembly out and set aside for later.
- In the HVE tip, the o-ring will have the most wear. Lubricating this o-ring will reduce the frequency of replacements. Swipe silicone lubricant weekly with a q-tip across the o-ring.
- If replacing o-ring, then use a small instrument to lever it out of HVE tip.
- Lightly lubricate a new o-ring and then fold o-ring in half twice. Insert o-ring back into the tip and lever it up into the inside groove. Take a tool to make sure it is seated inside properly.
- If servicing the HVE valve lever, pop out of the valve.
- Lubricate and clean out debris from lever o-rings. If piece is dirty, make sure to clean out the grooves where the o-rings sit.
- Put replacement o-rings on by rolling them into the grooves.
- Finally, pop the valve lever back into the body of the HVE valve.
Repair Parts:
- HVE quick disconnect base (#03-291)
- HVE lever (#03-931)
- (12) O-rings (#18-OR-2253)